Before First Use; Toasting Bread; Cleaning & Maintenance - Inventum GB 800 Mode D'emploi

2 | before first use
Before you use the appliance for the first time, please do
as follows: Unpack the appliance carefully and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. Check the
appliance after unpacking for any visible damage, that
could be caused by transportation.
Before plugging into a socket, check that the voltage in
your home corresponds with the voltage printed at the
bottom of the appliance. place the appliance on a stable
and heat resistant surface.
Wipe the housing of the appliance only with a damp
cloth. Note: the new appliance can give off a bit of smoke
and the typically 'new' smell. It is therefore advisable
to switch the appliance on several times at the highest
setting without bread inside.
use the toaster only for toasting bread. do not prepare
sandwiches in the toaster. If you do, cheese and fat can
come onto the heating elements which can shorten the
lifetime of the appliance.
3 | toasting bread
the toaster is suited to toast two slices of bread at once.
put the plug into the socket. place one or two slices of
bread into the toasting slot. push the bread lift lever
straight down to lower the slices.
buttons will light up blue. The blue indicator light below
the CANCEL button and browning level 3 will also light
up.
adjust the browning control with the + and - buttons.
blue indicator light below the chosen browning level will
light up.
Once the toasting cycle has finished, the appliance will
automatically switch off and the lever will return to it's
original position, lifting the toasted slices.
To remove smaller pieces of bread, lift up the bread lift
lever - hi-lift. this allows you to lift the bread higher and
is therefore easier to remove from the toasting slot.
The browning level is adjustable; position 1 is light and
position 5 is dark.
the toaster can automatically compensate the heat.
this means that when you directly toast another slice
of bread, the toaster calculates the temperature of the
device and adjusts the toasting time. this will ensure that
your second slice of bread has the same browning as the
first one.
With the defrost function you can defrost and toast bread
at the same time. place the frozen bread in the toasting
slot, push the lever down and press the DEFROST button.
The blue indicator lights below the buttons DEFROST and
CANCEL will light up.
the browning control is preset on position 3.
indicator light of position 3 will burn.
the change the browning control use the + and - buttons.
the bread will be defrosted and then toasted.
If you would like to reheat the bread, after it has been
toasted, press the REHEAT button. Place the bread in the
toasting slot, push the lever down and press the REHEAT
button. the blue indicator light below the rEHEat and
cancEL button will light up.
The rim around the
The
The
You can stop any process, toasting, reheating and
defrosting, by pressing the CANCEL button.
the appliance will automatically switch off and the lever
will return to it's original position, lifting the toasted
slices.
the toasting time depends on the dampness of the bread
and the thickness of the slice. If you only place one slice
into the toaster, it is possible that with the same setting
the slice will brown more. Select a lower setting of the
browning level.
If for whatever reason, a piece of bread is caught into
the toasting slots, do not try to remove it immediately.
use the hi-lift function to lift the piece of bread higher to
remove it easier. If this does not work, unplug the toaster
and leave it to cool down first. Than try to remove the
piece carefully without touching the heatingelements.
4 | to warm up bread roLLs
pull the lever on the left downwards. the bun warmer
will automatically rise. Place the rolls (max. 2) you want
to warm on the bun warmer and push the bread lift lever
down. The rim around the buttons will light up blue.
The blue indicator light below the CANCEL button and
browning level 3 will also light up.
To prevent overheating, set the browning level to position
1. If you only want to warm one bun, place it towards the
center on the bun warmer.
never place bread rolls directly on the toaster to prevent
damage to the appliance. always use the bun warmer for
warming bread rolls.
5 | cLeaning & maintenance
always unplug the appliance before cleaning. Wipe the
outside of the housing with a damp cloth and dry. never
use any abrasives! never immerse the appliance into
water or other liquids. remove the crumbtray at the
bottom of the toaster for easy cleaning of the inside. pull
the crumbtray carefully at the handle from the side of
the toaster. remove the crumbs and clean the crumbtray
with a damp cloth. Slide the crumbtray back into the
toaster after cleaning. check the correct placement of
the crumbtray before re-use.
11