Brother P-Touch RL-700S Manuel D'utilisation page 44

Specifications
Item
Display
Printing
Method
Print Head
Resolution
Print
Speed
Maximum
Width
Interface
Power Supply
Printing
Power
Standby
Consumption
Reading
Dimensions
Weight
Cutter
Frequency
Band
RFID Module
Supported
RFID
Operating Temperature/
Humidity
*1. Cutter life is approximately 30,000 cuts when using full cut, and 20,000 cuts when using half-
cut.
*2. Half-cut is used only with laminated tape.
*3. I-Code SLI is a trademark or registered trademark of NXP Semiconductors (formerly Philips
Semiconductors).
*4. I-Code SLI conforms to ISO/IEC 15693 and 18000-3 standards.
44
Specifications
LED lamps (blue and red)
Thermal transfer lamination/thermal printing
360 dpi, 384 dots
TZ, SZ or AL tape: 360 dpi
HG tape, high resolution mode: 360 x 720 dpi (in feed direction)
TZ, SZ or AL tape: up to 20 mm/sec
HG tape, high-speed mode: up to 40 mm/sec
27.1 mm
USB (Ver. 2.0, Full speed)
220-240 V AC, 50/60 Hz (with AC adapter)
Approx. 30 W
Approx. 2 W
Approx. 2.5 W
135 mm (W) x 190 mm (D) x 130 mm (H)
Approx. 1.5 kg
Full cut and half-cut
13.56MHz
*3 *4
I-Code SLI
10°C - 35°C, 20% - 80% RH
Details
*1 *2