Description Of Buttons; Lamp Display - Brother P-Touch RL-700S Manuel D'utilisation

Description of buttons

Button
ON/OFF button (
Feed and Cut button (
Open Cover button

Lamp display

The ON/OFF button lamp (blue) and Error lamp (red) indicate the current operating status.
Lamp Status
ON/OFF Error Lamp
Button (Blue) (Red)
Off
On
Flashing
Flashing
On
On Flashing
Flashing
On
Rapidly
Flashing Very
On
Rapidly
Turns the printer on and off.
)
Feeds and cuts the printed labels.
Use this button when the auto cut option in the printing dialog
box is not checked.
)
* Feed and cut does not function when SZ tapes are
loaded.
Opens the cover.
Off
• The printer is off.
Off
• The printer is working normally.
Off
• The printer is receiving data from the computer.
• The printer is receiving data from the computer, but unable
On
to print.
Load a tape cassette and close the cover.
• No tape cassette is loaded, or the cover is open.
Load a tape cassette and close the cover.
• The Feed and Cut button was pressed when SZ tape is
loaded. (Unable to use the Feed and Cut button when SZ
On
tape is loaded.)
• You reached the end of the SZ tape. Remove the SZ tape
cassette and check the surface of the tape. If "END" is
printed on the tape, replace the cassette with a new SZ
tape cassette.
• A print job is received, but the printer cannot print. Load the
correct tape cassette and close the cover.
• If ERROR is printed on the SZ tape, an error occurred
when writing data to the RFID tag or the tag is damaged.
Try printing again.
• Make sure that the tapes are not jammed in the printer.
Turn the printer off and on.
* If the problem is not solved, contact your dealer or
authorized service center.
• Turn off the printer, and then turn it on again.
* If the problem is not solved, contact your dealer or
authorized service center.
Before using your machine
Function
Printer Status
13