3. Driving the wheelchair with
the controller
3.1 Switching the controller on or off
To be able to drive or operate the electronic
adjustment options of the wheelchair, the
controller must be switched on. Press the on/off
button (B in figure 4).
3.2 Driving the wheelchair
Driving an electric wheelchair is done by operating
a joystick. Move the joystick forwards and the
wheelchair will also move forwards. Steer left and
right and the wheelchair will turn.
3.3 Speed
The maximum speed can be controlled by the
speed regulator on the controller (F1 en F2 in
figure 4). The maximum speed is displayed by
the LED lights above the speed regulators (D2
figure 4). Speed can be controlled with the joystick
while driving. If the joystick is moved a little, the
wheelchair will move more slowly.
8
VR2 Contoller
Rev.A