Niko 360-45010 Mode D'emploi page 40

360-45010
390-40011
Application 02.01:
Manual on/off via push button (170-00000), automatic off via motion sensor (fig.4c)
The 3-channel daylight control module on/off is switched on and off via a push button (170-00000).
For as long as the motion sensor detects movement, the light is controlled in 3 channels in accordance
with the set parameters. As the daylight incidence increases, the light dims in the premises in order
to reach the required, min. light level. If the motion sensor(s) do not detect movement, the light
switches off automatically after a preset period. For use in e.g. warehouses.
Application 04.01:
3-channel daylight control module on/off, manual on/off via a push button (170-00000),
automatic off via time switch (fig.4d)
The 3-channel on/off daylight control module is switched on and off via a push button (170-00000).
The light is controlled in 3 channels in accordance with the set parameters. As the daylight incidence
increases, the light dims in the premises in order to reach the required, min. light level. The light
can be switched off automatically via a time switch. For use in e.g. production premises.
4. SETTINGS
You can easily program and set the different parameters on the daylight control module by means
of the 4 control keys (see also 'Quickguide').
4.1. General set (see 'Quickguide', A and D)
In this menu, you can:
Select the type of application (00.01, 01.01, 02.01, 04.01)
Select the number of active channels (1, 2 or 3)
Select the mode:
- Custom: In this mode, you can modify the settings and parameters of the daylight control module.
- Backup: In this mode, you can view the saved settings and parameters of the daylight control module.
- Factory: In this mode, the daylight control module operates according to the fabric settings.
You can only view these settings, you can not modify them.
40 EN