Staple Selection - Metabo HPT N 1804DA Manuel D'instructions Et De Sécurité

STAPLE SELECTION

● Be sure to use only the genuine metabo HPT
staples for the N1804DA. The use of any other
staples can result in tool malfunction and/or
staple breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with
this Stapler.
Dimensions of staples
Finish staples 18 gauge
WARNING
.138"
(3.5 mm)
18 Gauge 1/4" Crown
Min.
.043"
(1.08 mm)
English
Max.
13