Iced Coffee Function; Hot Water Function; Save The Hot Water Quantity; Change The Mode - CASO DESIGN Cafe Crema One Mode D'emploi

13.10

Iced Coffee function

Place an empty vessel under the coffee outlet. Press
on the appliance. The device rinses and water is dispensed from
the coffee outlet. Then pour the rinse water away. Place a vessel
with the desired quantity of ice cubes under the coffee outlet.
Press the button and a double portion of strong brewed
coffee is dispensed. You can enjoy the Iced Coffee following this.
13.11

Hot water function

Place an empty vessel under the coffee outlet. Press
device rinses and water is dispensed from the coffee outlet. Then pour the rinse water
away. Place an empty vessel under the steam nozzle. Press
dispensed. You can now for example prepare tea with it.
► Please ensure that the water does not overflow. You can stop the flow by pressing the
button once more.
13.12

Save the hot water quantity

Press the once, press again and leave your finger on the button until the desired
amount of water is dispesend. Release the button. The quantity is saved.
13.13

Change the mode

You can set the device to different mode. The different mode are as follows:
Function/mode
Selected mode can be
recognized as follows
Illumination
Prebrewing*
Saving of filling level
Automatic switching off
* Pre-brewing: With less water pressure, the ground coffee is moistened and pre-brewed.
Then the device brews with normal water pressure and prepares the coffee.
Please note
ECO (energy-saving
mode)
Button
continously and the
others are flashing
-
+
+
After 10 minutes
Fast
Espresso button
lights
lights
continously and the
others are flashing
+
-
+
After 30 minutes
to turn
to turn on the appliance. The
and hot water will be
Standard
Coffee button
lights continously
and the others are
flashing
+
+
+
After 20 minutes
50