HumanTechnik MF-1 Mode D'emploi page 8

Maintenance and care
The flash module MF-1 does not
require any maintenance. If the unit
does become dirty, simply wipe it
clean with a soft, damp cloth. Never
use spirits, thinners or other organic
solvents.
Do not set up the unit where it will be
exposed to full sunlight for long peri-
ods. In addition it must be protected
against excessive heat, moistu re and
severe mechanical shocks.
Note: This product is not protected
against splash water. Do not place
any container s filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
Please make sure that the batteries
are not exposed to excessive heat
from such as sunlight, fire or anything
similar.
8 English
Warranty
The flash module MF-1 is a very relia-
ble product. Should a malfunction
occur despite the unit having been
set up and operated correctly, please
contact your dealer.
This warranty covers the repair of the
product and returning it to you free of
charge. It is essential that you send
in the product in its original packa-
ging, so do not throw the packaging
away. The warranty does not apply to
damage caused by incorrect hand-
ling or attempts to repair the unit by
people who are not authorised to do
so (destruction of the seal on the
unit). Repairs under warranty are only
carried out providing you have filled
in and returned the enclosed warran-
ty card from the dealer.
Always specify the product num-
ber in any event.