Aesculap Favorita CLi Mode D'emploi page 23

GB
USA
Display
Charging level
The charging level indicator is activated
automatically when moving the machine
and indicates the current charging level of
the battery according to three levels:
Fully charged
Partly discharged
Almost completely discharged
(flashes when battery is to be
replaced at the latest)
Oil LED light
Every 10 minutes, the oil LED light flashes
for a few seconds to remind the user to oil
the clipping head.
Temperature warning
Should the temperature of the battery
exceed 50°C, an LED warning light will
flash.
In that case, the machine should be
switched off, and the machine should be
allowed to cool down for
approx. 15 minutes.
Overload protection
In order to protect the machine against
overload, it is equipped with overload
protection. The overload LED light
indicates if the machine is about to reach
its limit. Should this limit be exceeded, the
motor will first of all switch off. The LED
light will flash for a few seconds, after
which the machine will switch off
completely.
Should this problem occur frequently, it is
necessary to check the plate pressure and
to oil the clipping head if required.
20