Preparation - Aesculap Favorita CLi Mode D'emploi

GB
USA
Operation

Preparation

Keep the packaging material
in case you need it for safe
storage or transport later on
 Check the completeness of the scope of
delivery
Check all parts for potential damage

due to transport
Safety
Damage due to incorrect
voltage supply
CAUTION
 Only use the device with the power
supply provided.
Intended use of the cordless
clipper Favorita CLi
Note
The device is intended exclusively for
cutting animal hair.
The Favorita CLi cordless clipper is used
for shearing small animals. The Favorita
CLi cordless clipper is used with a clipping
head to be selected according to the
respective application.
Intended use of the charger
XT433/Li-ion battery XT431
The charger XT433 is used exclusively for
charging the cordless clipper Favorita CLi
and the Li-ion battery. There is one
charging compartment each for both
components.
Charging process
1. Insert the plug into the power socket
2. Insert either the battery XT431 into the
rear charging compartment or the
machine with the battery into the front
charging compartment
3. The battery is being charged if the
LED light of the charging station
flashes
Operation
Shearing with comb attachments
The device can also be used with comb
attachments. Thus, the device is easy to
set for various cutting lengths.
Clipping on/removing the comb
attachment
1. Place the hook at the base of the
comb attachment between the
clipping head and the dovetail, and
pull the attachment comb over the
teeth of the clipping head until it
locks firmly into place
2. Pull the comb in the direction of the
teeth tips, so that it can be
disassembled again
Replacing the blade set
1. Firstly, switch off the device by using
the on/off switch 11
Push the lever 5 in the direction of the
2.
machine
3. Pull the blade set off the machine
4. Select a suitable blade set
5. Switch the machine on again by using
the on/off switch 11
6. Quickly push the blade set onto the
machine while it is in operation
18