Connecting Digital Av Receiver; Connecting The Power Cord - Panasonic DVD-S58 Manuel D'utilisation

Connections

Connecting digital AV receiver

Coaxial cable
VIDEO OUT
COMPONENT VI DEO OUT
DVD-S58
Set the DVD Player's Digital Audio Out to PCM or Bitstream depending on the
capabilities of your Receiver (see DVD Menu options > {Audio Out}). (
Tip:
–
If the audio format of the Digital Output does not match the capabilities of your
receiver, the receiver will produce a strong, distorted sound or no sound at all.

Connecting the power cord

After everything is connected properly, plug in the AC power cord to the power
outlet.
Never make or change any connections with the power switched on.
The unit should be installed near an
accessible AC power outlet, with the power
cord connected directly to it.
To completely disconnect power from the
unit, unplug the power cord from the AC
power outlet.
14
14
COAXIAL IN
AV Receiver
DIGITAL AUDIO OUT
AV OUT
(PCM/ BITSTREAM)
AUDIO OUT
COAXIAL IN
DIGITALAUDIO OUT
(PCM/ B ITSTREAM)
AUDIO OUT
DVD-S38
– This unit consumes a small amount of
AC power even when turned off. In the
interest of power conservation, if you will
not be using this unit for an extended
period of time, it can be disconnected.
Coaxial cable
VIDEO OUT
COMPONENT VIDEO OUT
page 26)