Using The Meter Memory - Lifescan OneTouch Ultra Guide D'utilisation

USING THE METER MEMORY

Your OneTouch
glucose and control solution test results with date and time in its
memory. It also provides you with 14- and 30-day averages of
your blood glucose test results. Review the test results in
memory with these easy steps.
® ®
Ultra Meter stores the 150 most recent blood
STEP 1
You may enter the memory mode either
with the meter turned off or immediately
after completing a test. Press the M button.
˘ and the 14-day average will appear
with the number of blood glucose tests
performed in this period. After three
seconds, the 30-day average will appear.
(If you are using the meter for the first
Q
time,
results in memory.)
These averages are calculated from the
blood glucose results obtained during the
last 14 and 30 calendar days. A S result
will be included in your averages as 33.3
mmol/L (600 mg/dL) and a T result as
1.1 mmol/L (20 mg/dL). Results marked as
control solution tests will not be included
in your averages.
Enter the Memory Mode.
indicates there are no test
34