Before Testing; Checking The Display; Coding The Meter - Lifescan OneTouch Ultra Guide D'utilisation

BEFORE TESTING

CAUTION: Failure to code the meter correctly will cause
inaccurate test results.

Checking the Display

Each time you turn on the OneTouch
®
Ultra Meter either by inserting a test
strip or pressing the M button, all
segments of the display will appear
briefly. This tells you that the system is
performing several self-checks to confirm
that the meter is working properly. To
check that all display segments are
working, hold the C button down.

Coding the Meter

Code numbers are used to calibrate the
®
OneTouch Ultra
®
Ultra Test Strips for accurate results. You
must code the meter before using it for the
first time and then every time you change
to another vial of test strips. Each time you
test, check to be sure that the code
number on the meter display matches the
code number on the test strip vial.
12
®
Meter with OneTouch
®
®