Ordering Replacement Parts; Disposal And Recycling - EINHELL BG-PW 48 Mode D'emploi D'origine

Pompe a eau a essence
Masquer les pouces Voir aussi pour BG-PW 48:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Anleitung_BG_PW_48_SPK1:_
GB
7.3 Storage
Rinse the pump thoroughly with water before
lengthy periods of inactivity or winter storage.
Close the petrol cock and allow the engine to run
until it stops to empty the carburetor.
Fill the tank fully to prevent rust formation.
Remove the drain plug (Figure 3 / Item 12) and
fully drain the pump housing.
Store the machine in a dry place out of the reach
of children.

7.4 Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
16
10.08.2011
10:00 Uhr
Seite 16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

41.713.41

Table des Matières