Adjusting The Seat - Evenflo Snugli Mode D'emploi

Adjusting the Seat

1
A
B
2
C
Always select a seat height position that provides the smallest leg opening
suitable for the baby. You should be able to fit two fingers between the
baby's leg and the carrier's leg openings
The carrier can be
adjusted to two seat
positions as baby grows.
The highest snap is used
A
for infants. To change the
seat position, unsnap each
seat positoning snap
B
and slide to the desired
level. Fasten snaps securely
BEFORE placing baby in
carrier.
C
.
C
4
1
A
C
B
2
D
E
Wearing Your Carrier
Put the carrier on before placing your baby
in the carrier.
Make sure the connector strap
A
back is buckled securely. With the carrier in
front of you, slip the carrier over your head.
Buckle the waist belt securely with an
B
audible click.
WARNING
Connector strap must be buckled securely
when carrying baby in the front position.
Baby could be seriously injured if shoulder
straps slip out of position.
C
Pull on excess waist
belt strap
C
remove all slack.
Buckle both shoulder straps . Make sure
D
they fasten with an audible click.
E
Tighten the shoulder
straps by pulling on
the excess strap
5
in the
to
.
E