Bosch GLM 40 Consignes D'utilisation/De Sécurité page 13

Masquer les pouces Voir aussi pour GLM 40:

Table des Matières

Les langues disponibles

Press the measuring button 2 for a new measurement on the

bottom line.

Press the measuring button 2 and the measurement from the

middle line will move to the top line and the measurement from

the bottom line will move to the middle line.

Press the measuring button 2 for a new measurement on the

bottom line. The last three measurements will display on the

bottom, middle, and top lines.

Area Measurement

For area measurements, repeatedly press button 4 until the

indicator for area measurement

Then measure the width and length one after the other as with a

length measurement.

The first measured value will be shown at the top of the

display. The laser beam remains switched on between the two

measurements.

Volume Measurement

For volume measurements, repeatedly press button 4 until the

indicator for volume measurement

Then measure the width, length and depth one after the other as

with a length measurement.

The first measured value will be shown at the top of the display.

The laser beam remains switched on between the three

measurements.

To measure, press the measuring button 2. The

measurement will be shown on the bottom of the

display.

Press the measuring button 2 and the previous

measurement will move to the middle line.

After the second measurement has been

completed, the area will be automatically

calculated and displayed. The end result will be

shown at the bottom of the display, while the

current measured value will be shown above it.

appears on the display 1.

-13-

Table des Matières