Technical Data
Enclosure:
Internal parts and inserting slots:
Ambient temperature:
Application:
Coding level high according to DIN EN ISO 14119:2014-03
ATTENTION !
!
To avoid wrong usage (e.g. by overload, mounting position
or usage in acid, alkaline or other hostile ambient condi-
tions) the limitations of the product have to be observed.
Please check in advance if your application requires the
usage of the more robust stainless steel model of SAFE-
MASTER STS. The requirements of the mounting and ope-
rating instruction must be fulfilled.
Dimensions [mm]
Key module 01/K
Key module 10/K
E. DOLD & SÖHNE KG • D- 78114 Furtwangen
e-mail: dold-relays@dold.com • internet: http://www.dold.com
PA + GF
Stainless steel
V4A / AISI 316 / AISI 630
- 25 °C bis + 60 °C
only as part of a unit of the
SAFEMASTER STS/K series
Variants and Accessories
Replacement set 01/K:
Consisting of key module 01/K and key;
Primary application when safety keys are used.
Replacement set 10/K:
Consisting of key module 10K and key;
Primary application when an authorisation/enabling key is used.
Replacement set 11/K:
Consisting of key module 01/K, key module 10/K and key;
Primary application when key transfer functions are used.
STS/K units including the actuator modules K/K for inverted appli-
cations or deviating operating sequences. For more information,
refer to the data sheet actuator modules K/K.
Note - Variants and Accessories
All replacement sets can also be made for key modules with additional
protective cover. The product designation of the replacement set will end
then with „S".
Example
Replacement set 11/K with protective cover will be replacement set 11S/K
Additional information for the installation and use of a key module 10/K or
10S/K directly above an electrical STS/K module is available in the data
sheets actuator module K/K and switching module RX/K and solenoid
locking module YRX/K.
•
P.O. Box 1251 • Telephone (+49) 77 23 / 654-0 • Telefax (+49) 77 23 / 654-356
8
SAFEMASTER STS/K Ersatz-Set / 30.07.20 de / 281A