Spypoint TINY-HD Manuel D'utilisation page 6

10
Lithium battery pack
This camera SPYPOINT ® can be powered by a rechargeable
lithium battery pack LIT-09/LIT-C-8 (sold separately, refer to
the section OPTIONS). This type of battery is less affected
by cold temperatures and lasts up to 3 times longer than an
alkaline battery. During the installation of the lithium battery
pack, slide the switch inside the battery case to RECH. Insert
the battery in the case as indicated and insert it inside the
camera (see figure below)
Top
Connector
SPY SPY P P
Connector
INT INT
TM
TO INSERT THE BATTERY CASE INSIDE
THE CAMERA
Connector
SPY SPY P P INT INT
External (12V)
This camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of a 12-volt connection, slide the switch
inside the battery case to ALK (the AA batteries can remain
safely inside the camera). If combined with a lithium battery
pack, slide the switch to RECH. For the accessories available,
refer to the section OPTIONS.
11
Connector
TM