Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
Power:
Allow the user to select the battery power
(Batteries/
or the electricity power.
Electricity)
Choose «Electricity» if the camera is
powered by a main electric supply.
(using a 12-volt DC adapter AD-12V,
sold separately). Main electric supply is
recommended for security purposes. It
provides an instant trigger time when a
movement is detected. The lithium battery
pack and the AA batteries can remain
safely inside the camera and it is ideal in
case of a blackout. A 12-volt DC adapter
that can provide a minimum of 800 mA is
required (See OPTIONS for accessories).
Note: When using the electricity power,
the «Multi-shot» mode and the «Delay»
between photos are disabled as the camera
starts instantly every time it detects
motion. Also, the imprinting temperature
on each picture is disabled.
Infrared:
Allow the user to choose how many LEDs
(On/One LED/
will be turned on.
Off)
On: Every LEDs work when taking
photos or videos at night.
One LED: Only a single LED works
(see figure). This option can be useful
when using an IR-Booster/Black LEDs
IR-Booster (sold separately, refer to the
section OPTIONS).
Off: LEDs are deactivated so your night
photos or videos are pitch black.
21
LED for
infrared
sensor
Publicité
Table des Matières
