Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch Professional GEX 40-150 Notice Originale

12 | English
Always wait until the power tool has come to a com-
u
plete stop before placing it down.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Power tools with electronic control are also suitable for pol-
ishing.
This power tool is not suitable for bench-mounted use.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Auxiliary handle (insulated gripping surface)
(2) Screw for auxiliary handle
(3) Orbital stroke rate preselection thumbwheel
(4) On/off switch
(5) Lock-on button for on/off switch
(6) Filter element (Microfilter system)
(7) Complete dust box (Microfilter system)
(8) Sanding pad
(9) Handle (insulated gripping surface)
A)
(10) Sanding sheet
(11) Screw for sanding pad
(12) Extraction outlet
A)
(13) Dust extraction hose
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
1 609 92A 5LT | (25.06.2020)

Technical Data

Random orbit sander
Article number
Sanding pad included with
product
Orbital stroke rate preselec-
tion
Rated power input
No-load speed n
No-load orbital stroke rate
Orbit diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-4.
Typically the A-weighted noise level of the power tool are:
81 dB(A); sound power level 92 dB(A). Uncertainty
K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-4:
a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
A)
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
A)
times when the tool is switched off or when it is running but
A)
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
0
(triax vector sum) and uncertainty K
h
2 2
< 2.5 m/s , K = 1.5 m/s ,
h
Pull the plug out of the socket before carrying out any
work on the power tool.
GEX 40-150
3 601 C7B 2..
●
●
W 400
-1
min 5500–12000
-1
min 11000–24000
mm 4
kg 2.4
/ II
Bosch Power Tools