Timer Touch Control - Whirlpool AKG 612 IX Mode D'emploi

TIMER TOUCH CONTROL

Setting the clock
"Auto" and "0:00" will start flashing when the unit is switched on for the first time. To set the clock, press the
central button for about 3 seconds. When
Wait until a beep tells you that the clock has been set (figure 1).
To set the time at a later stage, press "+" and "-" together for 3 seconds and then adjust the clock as described
above.
Minute minder
As this minute counter does not control the oven, when it finishes counting the oven will continue to work.
To set, press the central button for 3 seconds until
time.
To set the minute counter at a later stage, press the central button for 3 seconds and adjust as described
above.
The minute counter beeps when it finishes counting. To disable it, press any button.
Cooking time
This is a semi-automatic cooking function. It can be used to set cooking times.
Press the central button for 3 seconds. Then press it again until "dur" appears (figure 3). Press "+" and "-" to set
the required cooking time.
End of cooking time
The end of cooking time can also be set.
Press the central button for 3 seconds. Press the central button twice consecutively and wait for "End" to
appear (figure 4). Press "+" and "-" to set the required end of cooking time.
The oven will work in the set mode and at the set temperature until the end of cooking time.
Figure 1
appears, press "+" or "-" to set the correct time.
Figure 2
Figure 3
Figure 4
appears (figure 2). Press "+" and "-" to set the required
7