Whirlpool AKG 612 IX Mode D'emploi page 5

INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional
removal.
Fig. 1
1. Insert the wire shelf horizontally, with the raised part "A" upwards (fig. 1).
2. Angle the wire shelf when it reaches the locking position "B" (fig. 2).
Fig. 2 Fig. 3
3. Return the wire shelf to the horizontal position and push it in fully to "C" (fig. 3).
4. To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray is inserted in exactly the same way. The protrusion on the flat surface
enables the accessories to lock in place.
SLIDING RUNNERS
Using the turnspit
Put turnspit rod A into the drive unit and the groove B into the bend C.
Turn the plastic handle D anticlockwise.
Slide the shelf into the oven runners ensuring that the rod slots into
hole F.
The turnspit shelf must always be fitted in the middle of the oven
(second position from bottom).
5