IKRA APS 2010 LI Manuel D'utilisation page 11

Important note:
It is imperative to read these notes before putting your branch cutter into operation:
1. The Li-ion battery is built-in, it is to be charged before you use the tool for the first time.
2. Never use the supplied charger to charge any other tools or appliances.
3. The battery reaches its maximum capacity after approx. five discharge/charge cycles.
4. The battery branch cutter is driven by an integrated Li-ion battery. As the cutting device, the equipment is fitted
with a circular saw blade.
5. for the protection of the user, the equipment comes with a safety lock.
6. In periods of heavy duty battery will grow warm. Allow the battery to cool to room temperature before starting to
charge it.
7. for the function of the operating parts, please refer to the following instructions.
CoMPonentS
CorDLeSS CIrCLe SAW Pruner
1. safety lock
2. stop edge
3. saw blade
4. Crosshead screw for fixing the saw blade
5. On/off switch
6. Charging socket
7. Charger indicator
8. Blade cover
GB | Operating Instruction
GB-2
CHArGer
9. power supply unit
10. Charger cable plug