Dynamic Range Compression (Drc); Factory Reset; Sw-Version; Language - Albrecht DR 790 CD Manuel

3.6. Dynamic range compression (DRC)

This function reduces the difference between the loudest and
quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and
EN
loud sounds comparatively quieter.
Note: DRC only works if it is enabled by the broadcaster for a
specific station.
To change the DRC setting select MENU > DRC. The options
available are: DRC: off | on.

3.7. Factory Reset

A factory reset returns all user settings to default values, so that favorites, time/ date and other indi-
vidual settings are lost. To reset the device press MENU > Factory reset and confirm with

3.8. SW-Version

If you want to view the SW version press MENU > SW version and confirm with

3.9. Language

The default language is German. If you would like to change the language, press MENU > Langua-
ge or press „LANGUAGE" on the remote control to switch between German, English or French.

4. FM Radio Mode

FM mode receives analogue radio from the FM band and displays RDS (Radio Data System) infor-
mation about the station (if broadcasted).
The first time you select FM radio, the unit is set to the lowest frequency in the FM band.

4.1. Scan for Stations in FM Mode

To scan for the next available FM station press and hold P+ or P-. The unit scans up/down through
the FM band frequencies, showing the current frequency on the display.
The scan stops when a signal is found. The unit can be set to stop at each station or only at stations
with a strong signal (for details see „4.4. Scan Settings" auf Seite 27).
Alternatively, you can use the / buttons to tune manually in 0.05 MHz steps.
If you press the SCAN button, the radio scans the complete FM frequency band and automatically
saves the first 40 found stations to the preset memory.
Attention: all your previously saved presets will be overwritten by this!

4.2. Favorites

The unit has 40 favorites for FM, which work in the same way as the DAB favorites, described ear-
lier in chapter „3.3. Favorites" auf Seite 26.

4.3. Now Playing Information

While FM radio is playing, the screen shows its frequency, or if RDS information is available, station
name and any further "Radio Text" information.
Each time you press the INFO button the next set of information is displayed, cycling through: RDS
Radio Text, programme type, frequency, mono/stereo, time and date.

4.4. Scan Settings

By default, FM scans stop at any available station (All Stations). This may result in poor quality
audio from weak stations.
To change the scan settings (to stop only at stations with good signal strength) go to MENU > Scan
setting and select Strong Stations.
27
English