Marshalltown BULLET MARKSMAN ES00-1113 Mode D'emploi page 2

INTRODUCTION
Congratulations on your purchase of the Bullet by MARSHALLTOWN Marksman. It is proudly Made in the USA,
manufactured with the highest-grade materials, and can be used for flooring. We have designed it with the
flooring professional in mind.
Other features of your Marksman include:
• Ability to cut inside without dust
• Built in ruler for accurate cuts
• Full table with high-density polymer wear surface
• Metal-jacketed polymer bearings
• Aircraft grade aluminum frame
And can cuts material 5/8" thick and 13" wide, including:
• Engineered Hardwood Flooring (up to 1/2" / 12mm thick and 1250 Janka—ONLY cut by flipping material
over with the back facing up)
• Laminate Flooring
• LVT, LVP, VCT
• PVC & Rubber Tile
• Cove Base
• WPC/SPC/MLF
• Rigid Core
This owner's manual provides the information needed to operate and maintain this Marksman. Carefully read
and follow all safety and operating instructions in this manual. Ensure every operator of this flooring shear reads
this manual before operating the unit. The replacement of any part on this flooring shear with a component
other than a manufacturer authorized replacement part may adversely affect the performance, durability, or
safety of the product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this
operator's manual. The manufacturer reserves the right to make changes on or add improvements to its
product at any time without prior notice or obligation. The manufacturer reserves the right to decide, upon its
sole discretion and at any time, to discontinue this product or replacement parts thereof.
This manual covers the Marksman. For technical questions or repair parts, please call MARSHALLTOWN
customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
2 of 56
WS2522
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com