Brandt TI213BS1 Guide D'utilisation page 47

99625701_ML_B.qxd 19/11/04
C
hanging the type of gas supply (cont'd)
Transforming from natural gas to
butane/propane
When carrying out this operation, you
should successively:
Adapt the gas connection
Change the injectors
Adjust the retarder on the taps
A
DAPT THE HOB CONNECTION
new gas adjustment. Refer to the pa-
ragraph "Gas connections".
C
HANGE THE INJECTORS
wing way:
• Remove the supports, and all the
burner caps and heads.
• Using the spanner supplied, uns-
crew the injectors at the bottom of ea-
ch dish and remove them (fig 1).
•Replace these with the injectors
supplied in the wallet, in accordan-
ce with the gas rating table at the
end of the chapter; to do this:
Screw in the injectors by hand
until they are tight.
Put the spanner well onto the
injector.
With a pencil draw a line on the
hearth plate as indicated (fig. 2).
Turn the spanner clockwise
until the line appears on the
other side (fig. 3). Warning!
Do not go beyond this limit
as you are
liable to cause damage.
09:02 Page 47
Installing your hob in all simplicity
to the
in the follo-
Fig. 2
Grill
Cover
Head
Dish
Glass top
Spanner
Fig. 3
Spanner
Line
Fig. 1
Line
47