Brandt TI213BS1 Guide D'utilisation page 44

99625701_ML_B.qxd 19/11/04 09:02 Page 44
Installing your hob in all simplicity
G
as connections (Cont'd)
Possible connections
G ( )
AS DELIVERED BY PIPE NATURAL GAS
NATURAL GAS
- / - .
OR AIR PROPANE AIR BUTANE
One of the 3 following connections
must be used:
- connection with a rigid pipe (gas
standard G1/2).
The connection should be made at the end
of the elbow seal on the appliance,
Meter
or - connection using flexible un-
dulated metal tube with screw-on
connectors (fig. A of the preceding
page)
or - connection using flexible tube
with screw-on connectors (fig. B
of the preceding page)
These tubes must not exceed 2 me-
ters in length and must be acces-
sible along their entire length.
44