sunjoe TRJ13STE Manuel D'utilisation page 10

1. Hold the trimmer at an angle of approximately 10 – 30
degrees to the work area (Fig. 16).
Fig. 16
2. Slowly swing the trimmer from side to side (Fig. 17).
Fig. 17
3. Do not overload your trimmer; instead, take small "bites"
of grass, working from the top to the bottom. This will
keep the machine operating at high speed and will greatly
improve its cutting efficiency (Fig. 18).
Fig. 18
Edging
1. To convert for maintenance edging, turn OFF and unplug
the tool.
2. To use the edger guide + flower guard, flip it down from its
stored position (Fig. 19).
Fig. 19
3. Pull up edging coupler and turn the rear handle
counterclockwise and release (Fig. 20). The tool is locked
in edger mode.
Fig. 20
10
Edger guide +
flower guard
Rear
handle
Pull up edging
coupler to
rotate