Preparation; Preliminary Remarks; De Novospeed Retail Consists Of The Following Main Sections - Novoferm NovoSpeed Retail Manuel D'application

2. Preparations
2.1 Symbols
GB
Note!
Measuring
Levelling
Measuring out
Drilling
Tightning
Manual operation
Dangerous electrical voltage
2.2

Preliminary remarks:

Do not trail the top roller over the ground
During the installation, place the top roller
on a clean surface
2.3

De NovoSpeed Retail consists of the following main sections:

A top roller that consists of a door roller surrounded by a plastic door panel (cloth).
Two columns that support the top roller and guide the door panel.
A cabinet with the control box.
A box with further small parts.
Note! When installing multiple doors make sure to sort all parts carefully!
Report any transport damage immediately to Novoferm Netherlands BV.
+ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +++ NOTE! +
4
Forklift truck
Lubricating
Cutting
Reading
Clips
Safety helmet
Ty-Rap
‘ , etc. Installation sequence
Do not step on the cloth!
The following instructions apply to
standard NovoSpeed Retail doors
2.4
BOX
✔
1 ### ###
✔
2 ##### #
✔
3 #### ##
✔
4 ### ###
✔
5 #### ##
✔
6 ### ###
Ensure that the correct parts have
been supplied. When installing
multiple doors make sure to sort
everything carefully!
2.6
B1
B2
B3
B1 = B2 = B3?
Check the breadth
of the standard opening.
2.8
OK?
Check that lintel
a nd p osts are
straight and level.
2.5
Make sure that the work area is
adequately cordoned off.
2.7
H1 H2 H3
200 200
v v
H1 = H2 = H3?
Check the height
of the standard opening.
2.9
HL = HR?
HR
HL
Check that the
floor within the
range of the door
smooth and level.
GB
5