Meter Stand For Adjusting View Angle; Attached Quick Guide - OHAUS STARTER 3100M Manuel D'instruction

EN-8
For ST310 electrode connect to the BNC and Cinch socket. For 2-in-1 pH electrode (e.g. ST210)
you only need to connect to the BNC. Temp. socket is for a separate temperature electrode.
STCON3 or STCON7 have a built-in temperature sensor which do not need a separate
temperature electrode.
2.5 Meter stand for adjusting viewing angle
One unique design feature of the STARTER 3100M is the meter stand, which can be used to adjust
the viewing angle of the display in case of working on a high table.
2.6

Attached quick guide

Another unique design feature of the STARTER 3100M is the attached quick guide, the quick guide
is attached into the bottom housing of the meter.
STARTER 3100M Bench Meter