Initialising And Formatting Diskashur M; For Windows - iStorage DISKASHUR M2 Manuel De L'utilisateur

39. Initialising and formatting diskAshur M

After a 'Brute Force Attack' or a complete reset the diskAshur M
initialise and format the diskAshur M
To format your diskAshur M
1. Configure a new Admin PIN - see page 20, section 25, 'How to configure an Admin PIN after a Brute Force attack or reset'.
2. With the diskAshur M
2
unlock (blinking GREEN
3. Attach the diskAshur M
4. Windows 7: Right click Computer and then click Manage and then select Disk Management
Windows 8: Right-click left corner of desktop and select Disk Management
Windows 10: Right click on the start button and select Disk Management
5. In the Disk Management window, the diskAshur M
message box should appear for you to choose between MBR and GPT partition style. GPT stores multiple duplicates of this data
over the disk, as a result it's much more robust. On an MBR disk, the partitioning and boot information is stored inside single
place.
Select the partition style and click OK.
#28
before it can be used.
2
, do the following:
2
in standby state (RED LED), press the KEY ( ) button once and enter New Admin PIN to
LED).
to the computer.
2
is recognised as an unknown device that is uninitialized and unallocated. A
2

for Windows

2
will delete all PINs,data and the encryption key. You will need to
2
www.istorage-uk.com