How To Delete The User Pin Policy; How To Check The User Pin Policy - iStorage DISKASHUR M2 Manuel De L'utilisateur

8. How to delete the User PIN Policy

To delete the User PIN Policy, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down both
KEY ( ) + 7 buttons
2. Enter 070 and press the SHIFT ( ) button once
Note: To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid

9. How to check the User PIN Policy

The Administrator is able to check the User PIN Policy and can identify the minimum PIN length restriction and whether or not the use of
a Special Character has been set by noting the LED sequence as described below.
To check the User PIN Policy, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
LED) proceed with the following steps.
1. In Admin mode press and hold down both
SHIFT ( ) + 7 buttons
2. Press the KEY ( ) button and the following happens;
a. All LED's (RED, GREEN & BLUE) become solid for 1 second.
b. A RED LED blink equates to ten (10) units of a PIN.
c. Every GREEN LED blink equates to a single (1) unit of a PIN
d. A BLUE blink indicates that a 'Special Character' was used.
e. All LED's (RED, GREEN & BLUE) become solid for 1 second.
f. LEDs return to solid BLUE
The table below describes the LED behaviour whilst checking the User PIN Policy, for instance if you have set a 12 digit User PIN with
the use of a Special Character (121), the
BLUE LED blink indicating that a Special Character must be used.
PIN Description
12 digit PIN with use of a Special Character
12 digit PIN with NO Special Character used
9 digit PIN with use of a Special Character
9 digit PIN with NO Special Character used
BLUE LED), press and hold down the SHIFT ( ) button for a second - the
RED LED.
RED LED will blink once (1) and the
3 digit Setup
121
120
091
090
www.istorage-uk.com
Solid BLUE LED will change to blinking
BLUE LEDs
Blinking GREEN and BLUE
solid GREEN LED and finally to a solid
indicating the User PIN Policy has been successfully
deleted
Solid BLUE LED will change to blinking
BLUE LEDs
GREEN LED will blink twice (2) followed by a single (1)
RED GREEN
1 Blink 2 Blinks
1 Blink 2 Blinks
0 9 Blinks
0 9 Blinks
GREEN and
LEDs will change to a
BLUE LED
BLUE
GREEN and
BLUE
1 Blink
0
1 Blink
0
#11