How To Disable The Diskashur M; Bootable Feature; How To Check The Bootable Setting - iStorage DISKASHUR M2 Manuel De L'utilisateur

37. How to disable the diskAshur M

To disable the diskAshur M Bootable Feature, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin
2
Mode (solid BLUE LED) proceed with the following steps.
1. In Admin mode, press and hold down both
KEY ( ) + 8 buttons
2. Press "0" followed by another "0" (00)
3. Press the SHIFT ( ) button once
Note:
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid

38. How to check the Bootable setting

To check the bootable setting, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
LED) proceed with the following steps.
1. In Admin mode press and hold down both
SHIFT ( ) + 8 buttons
2. Press the KEY ( ) button and one of the following two scenarios will happen;
• If datAshur PRO is configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN & BLUE) become solid for 1 second.
b. GREEN LED blinks once.
c. All LED's (RED, GREEN & BLUE) become solid for 1 second.
d. LEDs return to solid BLUE
• If datAshur PRO is NOT configured as Bootable, the following happens;
2
a. All LED's (RED, GREEN & BLUE) become solid for 1 second.
b. All LEDs are off
c. All LED's (RED, GREEN & BLUE) become solid for 1 second.
d. LEDs return to solid BLUE
Note:
To immediately exit Admin Mode (solid
solid BLUE LED switches to a solid
LED), press and hold down the SHIFT ( ) button for a second - the
BLUE
RED LED.
LED), press and hold down the SHIFT ( ) button for a second - the
BLUE
RED LED.
www.istorage-uk.com

Bootable feature

2
Solid BLUE LED will change to blinking
BLUE LEDs
GREEN and BLUE
Blinking GREEN and
solid GREEN LED and finally to a solid
indicating the bootable feature has been
successfully disabled
Solid BLUE LED will change to blinking
BLUE LEDs
GREEN
LEDs will continue to blink
BLUE LEDs will change to a
BLUE LED
BLUE
GREEN
and
and
#27