DAITEM DP8000 Mode D'emploi page 29

D8551
Connection of receiver
ATTENTION: all connections to the
receiver must be made with the supply
disconnected.
Connections must respect all norms and
electricity standards in force.
G Connect the power cable to the receiver.
G Affix the cables to the wall using cable
clips (not supplied).
G Connect the power cable to a 230 VAC
protected mains circuit (protection module
230V/5A bipolar).
G Connect the device to command: VLV
type (very low voltage) 48 V max. (current
limit of the relay 48 V/1 A).
Power 230 VAC
(50 Hz)
VLV output
48V/1A max
NO type
GB
29