DAITEM DP8000 Mode D'emploi page 25

Masquer les pouces Voir aussi pour DP8000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

D8551
❍ TOTAL ARM AND OFF CHANNELS
Active channel
Operating modes
Total arm or Off
Momentary
Total arm or Off
(indicates the state
Arm/Off mode
of the system)
Off and Total arm
Arm/Off mode
* In this mode if the mains power is cut for more than 2 mins 30 secs, at the time the mains reappears the relay changes its state so mes-
sages of Total arm or Off are not received.
❍ ARM RELAY 1 (or 2) AND OFF RELAY 1 (or 2): only possible with a programmable remote control or with the D14411 communicator
(distant command function)
Active channel
Operating modes
Arm relay 1
Arm/Off mode
and Off relay 1
Arm relay 2
Arm/Off mode
and Off relay 2
Functionality
Activation of the relay for 2 secs. If the relay is already active,
the confirmation of the Off or the Total arm (retransmitted by the
control panel) is done by a deactivation of the relay for 2 secs
Activation of the relay upon receipt of the Total arm channel
(Complete arm or System arm), deactivation upon receipt
of the Off channel (retransmission by the control panel)*
Activation of the relay with the Total arm key of a remote
control and deactivation with the Off key (or with a distant
command)
Functionality
Activation of the relay upon receipt of Arm Relay 1 channel,
deactivation upon receipt of the Off Relay 1 channel
Activation of the relay upon receipt of Arm Relay 2 channel,
deactivation upon receipt of the Off Relay 2 channel
Position
of micro-switches
O
N
1 2 3 4 5 6 7 8
9 10
O
N
1 2 3 4 5 6 7 8
9 10
O
N
1 2 3 4 5 6 7 8
9 10
Position
GB
of micro-switches
O
N
1 2 3 4 5 6 7 8
9 10
O
N
1 2 3 4 5 6 7 8
9 10
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

D14000D8551

Table des Matières