DAITEM DP8000 Mode D'emploi page 24

P r e p a r a t i o n
G ALARM CHANNELS (Intrusion Alarm, Tamper, Technical 1 or Alert), Prealarm CHANNEL and Light CHANNEL.
Note: applications that can be added are indicated in this table (ex.: applications A and C can be added as seen in row A + C of the table).
Active channel
Intrusion alarm, Tamper,
A
Technical 1 or Alert
Intrusion alarm, Tamper,
B
Technical 1 or Alert
C
Light
D
Light
E
Pre-alarm (loud or quiet)
A
Intrusion alarm, Tamper,
+
Technical 1 or Alert
GB
C Light
A
Intrusion alarm, Tamper,
+
Technical 1 or Alert
D
Light
B
Intrusion alarm, Tamper,
+ Technical 1 or Alert
C
Light
B
Intrusion alarm, Tamper,
+
Technical 1 or Alert
D
Light
* Retransmission from control panel only
24
Operating
modes
Timed (3 mins) Relay deactivated by an Off command*
Timed (30 mins) Relay deactivated by an Off command*
Timer re-triggered by a new press
Timed (3 mins)
on the light button
Relay activated by a press on the light
Latching
button and deactivated by a new press
Relay deactivated by an Off command*.
Timed (10 secs) Only possible with the D14000 control
panel unit
Timed (3 mins)
}
Timed (3 mins)
Latching
If the relay is activated by the light
channel, an Off* command will not
}
deactivate it
Timed (30 mins)
Timed (3 mins)
}
Timed (30 mins)
Latching
Functionality
O
N
O
N
O
N
O
N
O
N
O
N
O
N
O
N
O
N
Arm (Total only)
Position
and disarm
of micro-switches
confirmation
1 2 3 4 5 6 7 8 9 10
Place
1 2 3 4 5 6 7 8 9 10
switch 5
to on.
1 2 3 4 5 6 7 8 9 10
Activation
of the relay
for 2 secs
1 2 3 4 5 6 7 8 9 10
to confirm
Off or Total
arm.
1 2 3 4 5 6 7 8 9 10
If the relay
is already
active, the
1 2 3 4 5 6 7 8 9 10
confirmation
of the Off or
the Total arm
is done
1 2 3 4 5 6 7 8 9 10
by a 2 secs
deactivation
of the relay.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
Daitem