Oven Cleaning; Disassembly Of Oven Door - Fagor CFF 964E Notice D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.4 OVEN CLEANING

CAUTION!
1.
Before cleaning you should wait until oven cools down. Hot heaters may
cause burns.
2.
Cleaning the oven in use of appliances for steam generation under
pressure is not allowed.
3.
It is the best to clean the bottom of the oven after each use, not to allow
the remains of food and spots of oil to roast again.
The oven compartment is coated with ceramic enamel, and both of the side covers
and the rear cover are coated with catalytic enamel.
During normal use, the oven compartment is heated to high temperatures, which
facilitates absorbing the emitted fumes by the catalytic enamel.
Periodically, especially after cooking very fat dishes, the self-cleaning cycle must be
carried out. It is done by in turning the oven on for one hour's time and setting the
maximum temperature (250°C). During this time, the oven door should be closed.
During the self-cleaning cycle, the dirt deposited on the oven walls oxidizes and
evaporates.
After some time, the catalytic covers will loose their self-cleaning properties; when
their surface becomes glossy they should be replaced.
In order to replace the catalytic covers, it is necessary to remove the oven door and
guide assembly.

5.4.1 DISASSEMBLY OF OVEN DOOR

Open the door entirely
Lock hinges on both sides of the door by placing the clamping ring 1 on the catch 2
of the hinge bow 3 (fig. 11)
Next grasp the door with both hands, turn it in closing direction through an angle of
0
45
and take out the hinges.
When the oven door is removed, you can dismantle both pairs of quides. The quides
and oven bottom should be preferably cleaned each time they get dirty.
CLEANING AND MAINTENANCE
Fig. 11 Taking out the oven door
13
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières