Cleaning And Care; Cleaning Of Surfaces; Care Information; Cleaning And Care Instructions - GUTMANN CARTA TYP 7500 Mode D'emploi

EN

CLEANING AND CARE

10. CLEANING THE SURFACES
Danger due to electric shock! Disconnect the extractor hood from the power supply by
pulling the plug out of the socket or by switching off the fuse. When cleaning, make
sure that no water penetrates the device. Regular cleaning of the surface saves labo-
rious removal of stubborn contamination. Only use conventional detergents or univer-
sal cleaning agents suitable for cleaning stainless steel/aluminium. Never use abrasi-
ve cleaning agents or steel wool. After cleaning the hood, treat the stainless steel
surfaces with a stainless steel care product. Painted surfaces should only be cleaned
using a mild detergent solution and a very soft cloth. Only use a soft damp cloth to
clean the operating panel.
On hoods fitted with a panel below the filter (edge extraction), grease deposits occur
at the edge of the panel. These deposits occur for physical reasons and are not due
to a malfunction of the hood. Please clean the panel underneath the filter regularly to
prevent the formation of stubborn residues.

11. CLEANING AND CARE INSTRUCTIONS

When cleaning the grease filters, also remove any grease deposits from the accessib-
le housing components. This will prevent a fire hazard and maintain an optimum ran-
ge of functions. Use hot soapy water or a mild window cleaning agent to clean the
hood. Do not scratch off baked-on deposits. Soften them using a damp cloth. Do not
use abrasive agents or scouring pads.
Note: Do not use alcohol (spirits) on plastic surfaces, as dull spots may result.
Caution: Ventilate the kitchen sufficiently, no open flame.
Only clean the operating panel with a soft damp cloth (mild detergent solution). Do not
use stainless steel cleaners for the sliding switch/pressure switch.
Stainless steel surfaces:
Use a mild stainless steel cleaner. Do not clean stainless steel surfaces with scrat-
ching sponges and cleaning agents containing sand, soda, acid or chloride! Clean
only in grinding direction. We recommend our stainless steel cleaner TZ 710.
Aluminium, varnished and plastic surfaces:
Use a soft micro fibre cloth. Do not use dry cloths. Use a mild window-cleaning agent.
Do not use aggressive cleaning agents or agents containing acid or lye! Do not use
scouring agents.
Glass surfaces:
The glass front installed on the cooker hood must only be cleaned with a mild glass
cleaner and a very soft cloth.
35