The Hdmi Interface; About Hdmi; Connecting Using Hdmi; Troubleshooting Hdmi - Arcam rmj BDP100 Manuel

The HdMi interface

If you have a HDMI- or DVI-equipped monitor or
display, you can connect it to the BDP100 using a HDMI
cable. The HDMI connector carries uncompressed
digital video, as well as digital audio.

about HdMi

HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection
for use with Blu-ray Disc players, digital TV, set-top
boxes, and other AV devices. HDMI was developed to
combine the technologies of High-bandwidth Digital
Content Protection (HDCP) and the Digital Visual
Interface (DVI) in one specification, with the addition
of transmission of digital audio information; HDCP is
used to protect digital content transmitted to DVI-
compliant displays.
HDMI has the capability to support standard or
high-definition video, together with stereo or multi-
channel surround-sound audio. HDMI features include
uncompressed digital video, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices.

connecting using HdMi

Use a HDMI cable to connect the socket on
HDMI
this player to a HDMI socket on a compatible display
device or receiver. The arrow on the cable connector
body should be face up for correct alignment with
the connector on the BDP100. If the BDP100 video
resolution has been configured to 'HDMI Auto' , then the
BDP100 will configure its video output automatically to
match the capabilities of the attached HDMI device.
NOTE: A HDMI connection can be made only with
HDMI or DVI-equipped components compatible
with both DVI and HDCP. note that if you choose
to connect to a DVI device, you will need an adaptor
(HDMI to DVI) to do so; a DVI/HDCP connection,
however, does not support audio signals.
If you require further information on the
possibilities for connecting your BDP100 to your
DVI/HDMI equipped display device, please contact
your Arcam dealer.

Troubleshooting HdMi

Problems with video
No video (blank screen)
Check that the HDMI cable is connected correctly at
<
both ends. If an HDMI-equipped A/V receiver is in
use, try connecting the BDP100 directly to the display
device, in order to isolate where the fault may lie.
Check that the display device is set to display the
<
HDMI input (i.e., has not been set to some other
video input, instead).
Check that the HDMI input of the receiver and/or
<
display device is enabled. See the user handbook of
the connected device for details on doing this.
Using an alternative video display device (e.g.,
<
connected via the composite video out), check that
video is output.
Consult the user handbook of the display device to
<
ensure that it can handle the output formats provided
by the BDP100. The BDP100 can provide the
following:
720 x 480p (nTSC progressive scan)
720(1440) x 480i (nTSC interlaced)
720 x 576p (PAL progressive scan)
720(1440) x 576i (PAL interlaced)
At least one of these standards must be supported by
the connected device in order for it to work with the
BDP100.
No video (random noise)
random noise will be displayed if the content-protection
algorithm fails to authenticate the attached device. This will
occur, for example, if a DVI device that does not support
HDCP (such as a computer monitor) is connected to the
BDP100.
To attempt to isolate this problem, remove all discs from the
BDP100, then power-off both the BDP100 and the connected
display device. Switch the display device on, then the BDP100
– at this point, the idle logo of the BDP100 should be shown on
the display device. If this is not the case, please check the items
listed above for a blank screen.
If the noise appears when a copy-protected disc (Blu-ray/DVD)
is played, then it is the authentication that is failing. Please
contact your dealer for further information.
e-7
Problems with audio
The type of audio provided by the HDMI connector
depends on the configuration of the BDP100 (see
' A udio Setup' on page E-21). Choose a setting according
to the capabilities of your audio system. note that
pure DVI devices (connections requiring a HDMI to
DVI converter cable) do not support audio via this
connection.
1280 x 720p
1920 x 1080i
1920 x 1080p