Video Output Resolution; Resolution Setting - Arcam rmj BDP100 Manuel

Audio Format Digital Output setting
Bitstream HD Dolby Digital 5.1
Bitstream Legacy Dolby Digital 5.1
Bitstream Mixed
Dolby Digital
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD Dolby Digital Plus /
Bitstream Legacy Dolby Digital 5.1
Dolby Digital Plus /
Bitstream Mixed
Dolby TrueHD
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD
resolution Audio /
DTS-HD Master Audio
DTS-HD High
Bitstream Legacy
resolution Audio /
Bitstream Mixed
DTS-HD Master Audio
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD
Bitstream Legacy
Bitstream Mixed
DTS
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD
Bitstream Legacy
Bitstream Mixed
LPCM 7.1 (48kHz /
96kHz)
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD
Bitstream Legacy
Bitstream Mixed
LPCM 5.1 192kHz
PCM 7.1
PCM 5.1
PCM Stereo
Bitstream HD
Bitstream Legacy
Bitstream Mixed
LPCM 2.0
(44.1kHz / 48kHz)
PCM 7.1
PCM 5.1
PCM Stereo
HDMI out Optical/Coax out
Dolby Digital 5.1
Dolby Digital 5.1
DTS 5.1 DTS 5.1
PCM 5.1 PCM Stereo
PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo
Dolby Digital 5.1
Dolby TrueHD
Dolby Digital 5.1
DTS 5.1 DTS 5.1
PCM 7.1 PCM Stereo
PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo
DTS-HD High PCM Stereo
DTS 5.1 DTS 5.1
DTS 5.1 DTS 5.1
PCM 7.1 PCM Stereo
PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo
DTS 5.1 DTS 5.1
DTS 5.1 DTS 5.1
DTS 5.1 DTS 5.1
PCM 5.1 PCM Stereo
PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo
PCM 7.1 PCM Stereo
PCM 7.1 PCM Stereo
DTS 5.1 DTS 5.1
PCM 7.1 PCM Stereo
PCM 5.1 PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
DTS 5.1 PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
DTS 2.0 DTS 2.0
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo
PCM Stereo PCM Stereo

Video output Resolution

The following table shows the video output resolution
at each video output for the different resolution settings
(see "Display" on page E-21).

resolution setting

Composite video out
nTSC PAL
HDMI Auto 480i 576i
1080p 480i 576i
1080i 480i 576i
720p 480i 576i
480p/576p 480i 576i
480i/576i 480i 576i
NOTES:
If the HDMI and Component video outputs are used simultaneously, the Component video
<
will be output at standard definition (480i/576i resolution).
Copy protected DVDs can only be output at standard definition over analogue video
<
connections (component or composite).
If the BDP100 is set to a resolution that your TV does not support, there may be no picture.
<
If this happens, connect the Composite Video output to your TV. Select the appropriate
video input on your TV to display the settings menu. Change the resolution to a value
supported by your TV then change the connections back to the desired configuration.
The 'HDMI Auto' setting uses the resolution value that the TV requests. This may not be
<
the best resolution. It is recommended to consult your TV documentation to discover the
best resolution setting and to set this resolution manually.
e-25
Video Outputs
Component video out HDMI out
nTSC PAL nTSC PAL
1080i 1080i Preferred Preferred
1080i 1080i 1080p 1080p
1080i 1080i 1080i 1080i
720p 720p 720p 720p
480p 576p 480p 576p
480i 576i 480i 576i