Arcam rmj BDP100 Manuel page 7

Power inlet
Connect the correct
mains cable here.
analogue audio output
Connect these to your amplifier's CD (or other
line-level) input using suitable high quality
interconnect cables. Ensure that the left and
right audio outputs from the BD player are
connected to the same left and right inputs on
your amplifier.
12V trigger input
This socket allows the BDP100 to be switched
in and out of stand-by mode by an amplifier
(or another item of AV equipment) with a
function. See page E-4.
12V TRIg OuT
RS232
This connection allows for remote
control from a third-party home
automation system or computer.
See page E-4 for more information.
Remote in
This allows remote-control signals
to be received by the BDP100
if the remote sensor is covered
(or otherwise not 'visible' to the
remote-control).
See page E-4 for more information.
coaxial digital output
Use this socket if you are using an
AV receiver with a coaxial digital
input. Connect to the digital input
using a suitable 75
CAUTION: Never connect
the digital output socket to a
conventional audio input.
composite video output
Connect this output to your
display if the display does not
support any other connection
types.
optical digital output
Use this socket if you are
using an AV receiver with an
optical digital audio input.
Zone 2 audio output
Use this analogue output to
provide audio for use in your
AV receiver's Zone 2. It can also
be used to connect a recording
device or headphone amplifier.
component video output
If your display does not support
HDMI but has a component input,
connect it to this video output.
e-5
uSb connection
screened cable.
Ω
Insert USB flash memory
devices here. USB memory can
be used to save downloaded
content. The BDP100 can also
play certain digital files stored
on USB memory drives (see
page E-8).
network connection
Connect this socket to a port on your
network router using an Ethernet
patch cable (see page E-9). An internet
connection enables interactive
content for BD-Live discs (for setup
details see "network" on page E-22).
HdMi digital video output
Connect this output to your display
or AV receiver if available for the best
digital video and audio connection
(see. page E-7 for details).