Technical Data; Noise & Vibration; Care & Maintenance; Disposal - Pattfield Ergo Tools PE-20 AGB Traduction De La Notice Originale

Technical Data

ANGLE GRINDER
Nominal voltage
No-load speed
Max. size of wheel
Spindle size
Weight
Sound pressure level (L )
pA
Sound power level (L )
wA
Max. vibration emission (a )
h,AG
SUITABLE BATTERIES
Voltage
Capacity
SUITABLE CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
146 EN
max. 20 V
8800/min
ø 115 mm
M14
1.47 kg
75.8 dB(A) / Uncertainty K = 3 dB(A)
86.8 dB(A) / Uncertainty K = 3 dB(A)
3.1 m/s / Uncertainty K = 1.5 m/s
2 2
PE-AK2, PE-AK4
20 V
PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
PE1H
100-240 V ~ 50/60 Hz, 78 W
14.4-20 V , 3.0 A
60 min for PE-AK2
120 min for PE-AK4
10-40 °C
/ II
0.25 kg
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
Care & Maintenance
Caution! Make sure the tool is
switched off and the battery re-
moved.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- Motor brushes can only be replaced by a
qualified person.

Disposal

The crossed-out wheeled bin logo
requires the separate collection of
waste electric and electronic equip-
ment (WEEE). Such equipment may
contain dangerous and hazardous substanc-
es. These appliances must be returned to a
designated collection point for the recycling of
WEEE and must not be disposed as unsorted
municipal waste. By doing so, you will help to
conserve resources and protect the environ-
ment. Contact your local authorities for more
information.
Children must not play with plastic bags and
packaging material, due to possible injury or
danger of suffocation. Store such material
safely or dispose of environmentally friendly.
Used batteries must be disposed of properly.
Battery selling stores and municipal collection
points offer special containers for battery dis-
posal.
EN 147