Replacements; Technical Data; Noise - Pattfield Ergo Tools PE-150DS Traduction De La Notice Originale

REPLACEMENTS

The grinding wheels should be replaced when
it's not possible to keep a distance of 2 mm to
the work rest or 2 mm to the eye shield. The
wheels and their accessories are available at
any Hornbach store.

Technical Data

Nominal voltage
Rated power
Intermittent operation
Wheel size
Maximum wheel rotating speed
Sound pressure level (L
Sound power level (L
Maximum wear of wheel allowed
Weight
Degree of protection
The values given are valid for a nominal voltage of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool.

Noise

The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 61029 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
88 EN
)
pA
)
wA
Caution! Make sure the replace-
ment wheels match the require-
ments stated in the technical data on the
next page!
230 V / ~50 Hz
150 W
30 min
150 mm x 12,7 mm x 16 mm bore
2950 min
-1
81,5 dB(A) / Uncertainty K = 3 dB(A)
94,5 dB(A) / Uncertainty K = 3 dB(A)
25 mm
6 kg
IP20