Security Settings; Restore Factory Settings - Nokia 1100 Guide De L'utilisation Rapide

Security settings

Note: When calls are restricted, calls still may be possible to the official
emergency number programmed into your phone.
Several types of codes are used in the phone:
• The security code, supplied with the phone, protects your phone against
unauthorized use. The preset code is 12345.
• The PIN code, supplied with the SIM card, protects the card against
unauthorized use. The preset code is 1234. If you enter the PIN code
incorrectly three times in succession, the SIM card is blocked. You must
enter the PUK code to unblock the SIM card and set a new PIN code.
• The PIN2 code is supplied with some SIM cards and is required to access
certain services, such as charging unit counters. If you enter the PIN2 code
incorrectly three times in succession, PIN2 code blocked appears on the
display, and you will be asked for the PUK2 code.
• The PUK and PUK2 codes may be supplied with the SIM card. If this is not
the case, contact your local service provider.
PIN code request—You can set your phone to ask for the PIN code of the SIM
card when the phone is switched on. Some SIM cards require activating this
function at all times.
Call restrictions—This network service lets you restrict incoming and outgoing
calls with your phone. Choose an option and select Activate, Cancel, or check
whether a service is activated (Check status).
Fixed dialling—This network service lets you lets you restrict outgoing calls to
selected phone numbers.
Closed user group—This network service lets you specify a group of people whom
you can call and who can call you.
Security level—Sets the phone to ask for the security code when a new SIM card
is inserted in the phone or when you select the internal phone book.
Note: When you change the security level, all the recent calls lists are
cleared, including missed calls, received calls and dialed numbers.
Change access codes—Lets you change the security code, PIN code, PIN2 code,
or restriction password. These codes can include the numbers 0 to 9 only.
Avoid using access codes similar to the emergency numbers, such as 911, to
prevent accidental dialling of the emergency number.

Restore factory settings

To reset some of the menu settings to their original values. Press Menu >
Settings > Restore factory settings. Key in the security code and press OK.
The names and phone numbers saved in the phone book are not deleted.
Nokia 1100 User Guide
M e n u f u n c t i o n s
27 Copyright © 2005 Nokia