► Switch the appliance off after use. This avoids unnecessary use of energy, and ensures
your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.
15.3 Operating the Appliance
15.3.1
Einschalten und Temperatur Einstellung
Plug the power plug into a suitable outlet.
The temperature of the cooker plate surface displayed: is the temperature of the
surface of the induction cooker lower than 50°C, the display shows „-L-". When the
temperature of the cooker plate surface is over 50 °C, it is displaying „-H-". An
acoustic signal sounds. Now the device is in standby mode.
Place the cookware on the hotplate.
Press "On/Standby" once, LED display shows "---". Now it is ready for cooking.
Press function key TEMP once.
The preset temperature stage "120°C" is selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 60 –
240°C. (Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
15.3.2
Timer
Timer Function. After the selection of the temperature then press function key
TIMER once. The display shows the number "0".With +/- keys, you can now select
the operating time in 1-minute intervals (up to max. 180 minutes).
Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode.
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.3.3
Switching Off
When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „-L-". When the temperature of
the cooker plate surface is over 50 °C, it is displaying „-H-".
During operation, remove the cookware, the device shall be an acoustic signal
sounds for 15S, then on "stand-by" mode.
caso FonDue
Please note
39