Disposal Of The Packaging; Setup; Setup Location Requirements - CASO DESIGN FonDue white Mode D'emploi

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces
the quantities of accumulated waste. Take any packaging materials that are no longer
required to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.

13.5 Setup

13.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 The appliance must be positioned on a solid, even, horizontal and heat-resistant
base with sufficient load-supporting capacity for the appliance itself plus the heaviest
anticipated cooking contents.
 The induction cooktop must not be operated on a base with an iron or steel content,
as this can heat up considerably.
 Select an installation location where children cannot reach the appliance's hot
surface.
 The appliance is not intended as a built-in appliance.
 Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
 Do not block the ventilation slots of the device. This may overheat the device. Keep a
min. distance of 5 to 10 cm to walls or other items.
 Do not set up the FonDue in the vicinity of appliance and objects which react
sensitively to magnetic fields (e.g.: Radios, televisions, cassette recorders, etc.).
 Do not place FonDue next to open fires, heaters or other sources of heat.
 Make sure that the mains connection cable is not damaged or squashed beneath the
device.
 Make sure that the mains connection cable does not come into contact with sharp
edges and/or hot surfaces.
 The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
 The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
caso FonDue
Please note
35