Design And Function; Operating Elements And Displays; Operating Panel And Display; Overheating Protection Facility - CASO DESIGN FonDue white Mode D'emploi

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.

14.1 Operating elements and displays

14.1.1

Operating panel and Display

14.1.2

Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the temperature of the
appliance exceeds the critical limit the appropriate error message is displayed. For safety
reasons the appliance shuts off further power supply. After the cooling-down phase the
appliance can be switched off and then back on again.
► You will find more detailed information on error messages in the chapter entitled „Fault
indications".
14.1.3

Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.
caso FonDue
1 Display
2 Temp – Temperature Button
3 Timer Button
4 On/Standby – Button
5 Taste (-) Reduction of temperature or duration.
6 Taste (+) Increase of temperature or duration.
Please note
37