Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
Fig. 1
Outlet box
Fig. 2
ANGLED CEILING
MAXIMUM 30 ° ANGLE
Recessed
outlet box
Fig. 3
Fig. 4
Outlet box
Provide strong
support
Ceiling
mounting
plate
Outlet box
4. MOUNTING OPTIONS
If there isn't an existing UL (cUL for Canadian
Installation) listed mounting box, then read the
following instructions. Disconnect the power by
removing fuses or turning off circuit breakers.
Secure the outlet box directly to the building structure.
Use appropriate fasteners and building materials. The
outlet box and its support must be able to fully support
the moving weight of the fan (at least 50 lbs). Do not
use plastic outlet boxes.
Figures 1, 2, and 3 are examples of different ways to
mount the outlet box.
NOTE:
If you are installing the ceiling fan on a sloped
(vaulted) ceiling, you may need a longer downrod
to maintain proper clearance between the tip of the
blade and the ceiling. A minimum clearance of 12" is
suggested for optimal operation.
NOTE:
Depending on the location you have selected
for installation, you may need to purchase and install
a "Joist Hanger" for the support of the outlet box.
Make sure the joist hanger you purchase has been
designed for use with ceiling fans. (Fig. 4)
Publicité
Table des Matières
