Use Instruction; Temperature Setting - Beper 50.810 Manuel D'instructions

Steam iron Use instructions

USE INSTRUCTION

HOW TO USE IT
During the first use, a light smoke caused by the evaporation of the protective oil applied in manu-
facture may appear; this is normal and after some use, the smoke will disappear.
Before using the iron make sure to remove all stickers or protective film, if necessary use a soft cloth.
Pay attention not to scratch the soleplate with mettalic objects such as zip, butons, etc.
Check if the tank is full of water ; to use steam system fill the tank with water (see paragraph below).
Before connecting the cord supply on the socket, please check the main voltage.
ATTENTION : THE SOLEPLATE ISVERY HOT, DO NOT TOUCH WHEN USING !
KEEP AWAY FROM CHILDREN.
IRONING
1 – Set the temperature on position "MIN".
2 – Fill the tank with the desired quantity of water.
3 – Put the iron on vertical position, the soleplate must not touch objects or other.
4 – Plug the cord supply on the socket.
5 – Set the temperature on the desired temperature, and refer to symbols on the temprature button.
6 – Start ironing
7 – When complete, put the iron in vertical position and unplug the cord supply from the socket.
The iron must always be in movement on the cloth to avoid any risk of burns on it.

TEMPERATURE SETTING

Always consult the labels of washing and sharpening inside clothing. If you cannot find them and if
you do not know the type of fabric, please refer to the table below:
The numbers of points on the iron temperature adjustment button (1) indicate the lower (•) and
higher (•••) temperature.
16