Assembly; Carton Contents; Install Handle; Install Mounting Foot And Lower Gun Holder - Westinghouse WPX2700 Mode D'emploi

ASSEMBLY

ASSEMBLY

CARTON CONTENTS

Weight hazard. Always have assistance when lifting the
pressure washer.
1. Carefully open the carton.
2. Remove and save the carton contents.
3. Remove and discard the packing tray.
4. Unfold the top of the plastic bag enclosing the pressure
washer.
5. Carefully cut the vertical corners of the carton.
6. Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
Item
• User manual
• Quick Start Guide
• Bottle 10W-30 oil
• Bottle funnel tip
• Spray gun
• Spray gun lance
• Handle
• High pressure hose
• Mounting foot
• Nozzle cleaning tool
• Spray nozzles (WPX2700)
• Spray nozzles (WPX3200)
• Nut, M8
• Spray gun upper holder
• Push rivet
• Spray gun lower holder
• Bolt and nut, M6
• Washers
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
8 | Westinghouse Outdoor Power Equipment, LLC
Quantity
1
1
1
1
1
1
1
1
1
1
4
5
1
1
1
1
1
2

INSTALL HANDLE

Install the handle on the lower frame with the decal side
facing the engine. Slide the handle downward until the
spring buttons click into place through the holes in the
handle.
INSTALL MOUNTING FOOT AND LOWER
GUN HOLDER
Install the mounting foot and secure with the M8 Nut.
Attach the lower gun holder with the M6 screw, washers,
and nut.

INSTALL UPPER GUN HOLDER

From the front of the unit, remove top-right bolt, washers,
and nut. Reinstall with the upper spray gun holder. From
the rear of the unit, install the push rivet as shown.